breakthrough.charging

Published 2026-04-17T23:31:24Z UTC by Jacques / SPRAXXX

id: PI_BREAKTHROUGH_CONNECTOR_SPEC_2026-04-17T00-00-00Z type: invention_record format: human_machine_readable_v1 status: draft_locked_from_user_statements date_utc: 2026-04-17T00:00:00Z project_anchor: BREAK THROUGH / SPRAXXX 2026 human_intelligence: Jacques machine_intelligence: GPT authorship: concept_origin: Jacques machine_role: transcription_structuring_math_blueprint_only title: BREAK THROUGH — Connector Direction / One Module One Time summary: > User-originated charging architecture centered on one permanent module concept. Each phone carries a built-in receiving module. The charging side uses a portable power unit with a pull-out lead and a magnetic connector that mates to the phone-side module. Goal: eliminate fragile charger-tip chaos, reduce port wear, simplify charging, and standardize one durable connection path.

core_statement: - One module, one time. - The module goes into the phone. - The charger body stores the wire. - The connector is pulled out when needed. - The connector magnetizes itself to the module in the phone. - The system should be small, durable, repeatable, and simple.

concept_origin_record: inventor: Jacques explicit_user_claim: > This is the user's idea. Machine side did not originate the concept and must preserve attribution distinctions in all future briefs, specs, or filings. attribution_rule: - originator_inventor_credit_stays_with_jacques - machine_assistance_may_be_listed_as_structuring_only - no_blurring_of_originator_vs_adapter_roles

system_definition: name: BREAK THROUGH family: unified_magnetic_embedded_charging_system product_intent: - permanent phone-side module - portable charger with housed or retractable lead - magnetic connection event - reduced charger-tip clutter and failure - optional future phone_to_phone mode

architecture: phone_side: module_location: inside_phone_or_phone_side_receiver_implementation_v1 required_elements: - magnetic_alignment_zone - charging_contact_interface_or_equivalent_receive_point - protection_circuit - regulated_charge_path - thermal_monitoring charger_side: body_type: portable_power_body_or_wall_power_body required_elements: - housed_wire_or_spindle_storage - pull_out_lead - locking_or_length_hold_mechanism - magnetic_connector_head - charger_control_electronics connection_event: action: - user_plugs_charger_body_to_power - user_pulls_out_connector_lead - connector_head_approaches_phone - magnets_self_align - charging_begins result: stable_repeatable_low_friction_mating

connector_direction: preferred_v1_connector: magnetic_pogo_pin_connector rationale: - compact - durable - self_aligning_with_magnets - suited_for_repeated_use - better_than_fragile_exposed_tip_systems recommended_pin_count: preferred: 4 minimum: 2 pin_count_reasoning: 2_pin: use: power_only benefit: simplest_lowest_cost 4_pin: use: - power - ground - id_or_handshake - future_expansion benefit: safer_and_more_expandable durability_target: mate_cycles_minimum_goal: 10000_plus finish_goal: gold_plated_contacts mechanics_goal: spring_loaded_pins_with_misalignment_tolerance

size_direction: connector_face_target_mm: width_range: 6_to_12 design_goal: - low_profile - minimal_phone_bulk - strong_enough_to_hold_during_normal_handling - small_enough_to_feel_native_not_clumsy

mathematics_snapshot: battery_reference: battery_capacity_mAh: 4500 nominal_voltage_V: 3.85 energy_Wh: 17.33 charger_power_reference: launch_target_W: 15 efficiency_assumption: end_to_end_effective: 0.75 effective_battery_power_W: 11.25 estimated_full_charge_time_hours: raw: 1.54 realistic_range: 1.8_to_2.2 phone_to_phone_reference: donor_available_energy_Wh_if_70_percent_transferable: 12.13 transfer_efficiency_assumption: 0.65 delivered_energy_Wh: 7.88 receiver_gain_percent_of_similar_battery: 45.5 thermal_note: estimated_heat_loss_W_at_15W_and_75_percent_efficiency: 3.75

pricing_direction: user_target_price_usd: 49.99 realism_note: > Fully built-in OEM phone integration is not a realistic first-market product at $49.99 from zero. A simplified v1 is more realistic as a charger plus receiver case/module or receiver insert. likely_v1_retail_lanes: aggressive: 49.99 more_realistic: 49.99_to_69.99 warning_note: - price_target_depends_on_simplified_v1_scope - full_internal_factory_phone_integration_requires_oem_path

v1_product_path: first_sellable_version: - magnetic_retractable_or_housed_lead_charger - phone_receiver_case_or_module why_v1_not_oem: - faster_to_prototype - lower_barrier - lower_political_dependency - proves_market_before_phone_manufacturer_integration

design_rules: - one_module_one_time - reduce_port_wear - reduce_cable_mess - connector_should_self_align - no_loose_tip_garbage - preserve_authorship_credit - keep_system_small_and_repeatable - design_for_real_use_not_demo_only

next_correct_moves: - lock_authorship_in_dated_record - define_v1_as_charger_plus_receiver_module - write_manufacturer_brief - draft_parts_spec_for_4_pin_magnetic_pogo_interface - sketch_mechanical_layout_for_pull_out_spindle_charger - estimate_bom_against_49.99_target

record_closure: statement: > This .pi artifact preserves the user's stated invention direction in structured form. It records the connector decision lane, pricing intent, and authorship distinction. carry: concept_origin_and_primary_authorship_remain_with_jacques